Enidlas 1550nm fiber laser, with state-of-the-art technology.




Enidlas 1550nm  fiber laser, with state-of-the-art technology.






Enidlas 1550nm
1550nm fractional laser technologyautomatically opens the skin regeneration repair function, and realizes thereorganization and regeneration of collagen fiber and elastic fiber, so as toachieve the purpose of removing all kinds of lines in 2 minutes.1550 fiberlaser can output power up to 35W, which is 3-4 times of the power output comparedwith the same kind of equipment  toensure the integrity and stability of the light energy output.

1550nm pulse laser of specificwavelength can selectivity penetrate the epidermis, stimulate the damagedcollagen layer, produce new collagen, new collagen tissue growth at a normalspeed, gradually repair damaged collagen layer, improve skin texture andcondition, can significantly reduce the appearance of wrinkles.

Enidlas1550 laser use nanometerfiber fractional laser principle to thermal stimulation the skin, resulting in65 ~ 70 degrees, acting on the papillary layer, to produce new collagen, usethe function of human body repair itself;Stimulate skin collagen and elasticfiber hyperplasia, accelerate skin metabolism, make skin more elastic andimprove texture.It can instantly smooth wrinkles and remove wrinkles Safety,minimally invasive, zero risk, the treatment can be operated in a course toachieve 80% of the effect.


Fromage 25 ,human skin relaxes 1mm annually.The general skin will look relaxed about 3.5cm on age60.The relaxation of the peripheral parts of the eye and mouth appears in theform of wrinkles.1550 nm laser create micro dots on flabby skin (CMX 1 cm therecan be a maximum of 784 trigger dot) through tiny dot, make the skin to form anew organization and contraction flabby skin to make skin more elastic younger.


Each laserequipment has its own indications,compare to co2 laser,co2 laser ismore efficient for exfoliation freckle removal, but for facial anti-aging andanti-wrinkle, 1550nm laser is more suitable.
1550nm and1927nm both are absorbed by water, but after the same energy is applied to theskin, the water absorbs of energy is differently.
1550nm absorption rate is about10,1927nm is about 100. So the same energy , 1927 will quickly absorbed, it isdifficult to penetratedeep to skin.But for 1550, thewater absorption is relatively low, when applied on the skin,parts are absorbed,andother parts penetrate to the skin deep, so 1927 role in the shallow , 1550 rolein the deep.
2940nm laser, its water absorption rate is very high, it will immediatelybeing absorbed by water when applied on skin,can not penetrate deeper, so thepenetration depth is very shallow, only continuous irradiation can have a deepeffect.
1064nm Nd:Yag laser, water absorption coefficient isonly 0.1, if in accordance with the principle of the front, does it mean thatthe penetration depth is deeper? That's not true. Because the water absorptionis too low, the organization in the water will scatter the laser, the energy isdifficult to focus, so it is difficult to produce good necrosis solidification,sothe depth of 1064nm is not so deep.
In general, 1550nm and1927nm are achieved  the effect ofcoagulation necrosis by water absorption, 1927nm water absorption rate ishigher, so the penetration depth is more shallow, mainly for superficialtexture, pigment etc; 1550nm  acts on thedeep,better for wrinkles and scars removal,shrink pores etc.

The figure below is the simulateddepth of the 1550nm&1927nm. The cross axis refers to the energy of thethree lasers, and the longitudinal axis is the penetration depth.
The same 20mJ energy,1927nm penetrationshallow,1550nm penetration deep,1927nm  more suitable for skin texture, pigmentimprovement, 1550nm is more suitable for wrinkles, scars, including theimprovement of pores.
Water absorption principle: thewater content of each layer of skin is different, from the epidermis to thedermis deep layer, the water content is increasing,when 1550nm penetration the skin,epidermis absorption of energy is very small, but the deep water contentincreased, the energy can be absorbed immediately, and then continue to go deeppenetration to form a band of solidification necrosis in the dermis, but theepidermis is fine.


Endilas 1550nm laser
Do not peel skin, only penetrate the skin
Trauma contrast

Drauma depth contrast

Therelationship between density and effect
The greaterthe density, the greater the irritation to the skin,skin tissue is more able to carryout a large number of healing reactions,stimulating the growth ofcollagen and the regeneration of skin tissue.

Efficacy and safety



ENIDLAS 1550nm advantage

First, safety. The wavelength fractional laser is 1550nm,which is the most suitable wavelength for skin after testing, and will notcause anti black. Moreover, the distance between the laser head and the humanskin is fixed,  it is the safest and mosteffective distance after the detection.
Second, compared with the traditional laser treatment, thefractional laser has more clinical applications, like youth acne, finewrinkles, skin aging, chloasma, large pores, dull skin problems, especially foryouth acne, the effect is obvious.
Third, the whole machine has no any consumables, it doesnot need to replace any spare parts, will not increase the use cost.
Fourth, with a short recovery period, micro stripping,micro pain, obvious treatment effect and other characteristics.



Wuhan Dimed Laser Technology Co., Ltd
Tel: +86 27 59706606/ 08
Skype: 244067255@qq.com

Comments

Popular posts from this blog

Peralas- Affordable 980nm Diode High Intensity Laser Therapy Equipment Back Treatment

Class IV Lasers in Physical Therapy

Best Diode Laser for Veterinary Laser Surgery